Before installing the organic fertilizer double axis mixer, the following key points should be noted:
1. Concrete foundation: The equipment should be installed on a level concrete foundation and fixed with anchor bolts. When installing, it should be noted that the main body is perpendicular to the horizontal plane.
2. Equipment inspection: Before installation, the clay and dirty soil mixed into the organic fertilizer mixer during transportation or unloading from the box must be cleaned first. Check whether the equipment has deformed, damaged or lost parts during transportation. If any damage is found, it should be repaired. After installation, check if the bolts at all parts are loose and if the main machine door is tight. If any are loose, please tighten them.
3. Electrical and power configuration: Power lines and control switches should be configured according to the power requirements of the equipment. The installation of electrical equipment should comply with relevant national regulations. Wires and cables should have protective enclosures to prevent rat bites.
4. Trial operation: After installation is completed, conduct a no-load trial operation to check whether all components of the equipment are operating normally. After the no-load trial run is normal, a load trial run can be conducted to check the performance of the equipment under actual working conditions.
5. Installation sequence: From top to bottom, first position the main unit and the rack, and then install all connecting pipes and electrical equipment.
6. Equipment Numbering: Before entering the installation site, each organic fertilizer equipment should be numbered, an installation process flow card and schedule should be formulated, and the equipment should be transferred to the site one by one for installation in accordance with the installation process sequence requirements.
Through the above steps, the installation quality of the organic fertilizer double-shaft mixer can be ensured, and t