What do you need to pay attention to when cleaning the dead Angle of organic fertilizer equipment

When cleaning the dead corners of organic fertilizer equipment, the following matters need to be noted:
1. Equipment inspection: Before cleaning, check whether the equipment is intact, especially the tank, pipeline and valve.

2. Regular cleaning: regular cleaning of the tank inner wall and bottom of the residual materials, to prevent blocking the pipeline and affect the fermentation effect. Observe the running status of the device: Pay attention to the running status of the device, and stop the maintenance in time if any abnormal situation is found.

3. Safe operation: During the operation of the equipment, personnel are strictly prohibited from entering the tank to prevent dangerous accidents.

4. Prevent blockage: During the operation of the device, blockage may occur. In this case, you need to clear the blockage in time to avoid affecting the normal operation and work efficiency of the device.

5. Maintenance: Regular maintenance of the organic fertilizer production line can extend the service life of the equipment and ensure the efficiency and stability of the equipment.

6. Bearing lubrication: the bearing in the organic fertilizer equipment bears the full load of the machine, and good lubrication has a lot to do with the service life of the bearing.

7. Lubricating oil cleaning: lubricating oil directly affects the service life and operation rate of organic fertilizer equipment, so the injected lubricating oil must be clean and well sealed.

8. Check the wearing parts: pay attention to check the wear degree of the wearing parts of the organic fertilizer equipment, pay attention to replace the wearing parts at any time.

By following the above precautions, the dead corners of organic fertilizer equipment can be effectively cleaned up, ensuring the normal operation of the equipment and extending the service life of the equipment.