How to prevent rust of organic fertilizer equipment

The method of preventing the rust of organic fertilizer equipment can be started from the following aspects:

1. Clean the surface: clean the surface of the equipment regularly to remove dust, dirt and salt and other substances to avoid them from reacting with the moisture in the air to produce oxides and lead to rust.

2. Drying treatment: After cleaning, it can be dried with filtered dry compressed air, or dried with a dryer at 120~170 ° C.

3. Anti-rust coating: Coating the surface of equipment and parts with anti-rust agents, such as anti-rust grease, can effectively protect it from the erosion of humid air.

4. Anti-rust paint: the iron parts of the equipment are treated with anti-rust paint, and stored in a ventilated and dry place after coating.

5. Storage environment: Store the device in a dry, ventilated and dust-free place to avoid moisture and corrosion.

6. Moisture-proof equipment: In the workshop environment, humidity control equipment, such as dehumidifier, can be installed to maintain the appropriate humidity level.

7. Regular maintenance: Regularly lubricate the transmission parts of the equipment to reduce wear and extend service life.

8. Prevent the motor from moisture: if the motor is not used for a long time, the motor of the organic fertilizer production line equipment should be placed in a ventilated, dry and clean warehouse.

9. To prevent the aging of rubber parts: the rubber parts of organic fertilizer equipment are damp or stained with oil, which is easy to cause cracks in aging and shorten the service life. During the storage of the equipment, jacks or sleepers should be used to lift the front and rear Bridges of the locomotive so that the tires are off the ground and do not bear the load.

Through the above measures, it can effectively prevent the rust of organic fertilizer equipment, extend the service life of the equipment, and ensure the long-term stable operation of the organic fertilizer production line.